A Couple of Baby Quilts

Quote

I’ve just completed another couple of Baby Quilts.  One for a boy and one for a girl:

These were very simple and quick to piece and a good way use up scraps.

Baby Buds Quilt

Baby Buds Quilt

Sail Boats Quilt

Sail Boats Quilt

 

 

 

 

 

 

Both quilts are made up of 6 x 12″ squares (blocks). Here are the instructions for the Sailboat Quilt.

Sailboat Quilt

For each 12″ block you will need:

White Fabric:

  • 4 x 3½” squares
  • 3 x 3⅞ squares

Yellow Fabric:

  • 2 x 3⅞ squares
  • 2″ x 156″ (approx) for binding

Orange Fabric:

  • 2 x 3½” squares
  • 1 x 3⅞ square

Turquoise Fabric:

  • 4 x 3½” squares

To complete the quilt you will need:

Navy Fabric:

  • 9 strips 3½” x 12″
  • 4 strips 3½” x 33″

Backing Fabric:

  • 36″ x 48″

Wadding/Batting:

  • 36″x 48″

Use a ¼” seam allowance and press your seams open as you sew.

Start by joining 2 white 3⅞ squares to 2 yellow 3⅞ squares. Then cut on the diagonal to create 4 squares of one white and one yellow triangle.

Then do the same with one orange and one white 3⅞ square. There are many sites with detailed Instructions on how to do this.  Here’s one of them.

The blocks are constructed by piecing 4 rows of 4 squares then stitching the rows together in the following pattern:

Piecing instructions for Sailboat Quilt

Piecing instructions for Sailboat Quilt

Once you have made 6 blocks, stitch one 12″ navy strip to each side of 3 blocks and one 12″ strip to only the right hand side of 3 blocks.

Now stitch the rows together in 3 groups of 2 blocks by adding one 33″ navy strip to the top and bottom of one group of 2 blocks and then add blocks and strips, working your way down the piece until you have 3 groups of 2 blocks enclosed in navy strips.

Place the backing fabric right side down on a large table, top this with the wadding then lay the pieced sailboats right side up on top of the wadding.  Pin all 3 layers together with large safety pins or tack/baste starting at the middle and working out towards each side.

3 layers

3 layers

Quilt  with wavy lines to represent the sea.

Fold binding strip in half and press so you have 4 long pieces each 1″ wide. Machine each piece to each side of your quilt with raw edges together.  There is a great tutorial on how to do this here. (You’ll find the whole binding process much simpler and easier if you use a walking foot on your sewing machine.)

Either embroider or use an indelible marker to add your name, the date and who the quilt is for to a scrap of fabric and sew it to the back of the quilt.

Now you are ready to give a truly unique and personal gift.

Baby Buds Quilt

For each 12″ block you will need:

White Fabric:

  • 1 x 4½” squares
  • 3 x 4⅞ squares
  • 4 strips 4½” x 36″
  • 9 strips 4½” x 12″

Centre Square Fabric:

  • 1 x 4½ square
  • 2″ x 156″ (approx) for binding

Pink Pattern 1 Fabric:

  • 1 x 4½” squares
  • 2 x 4⅞ square

Pink Pattern 2 Fabric:

  • 1 x 4⅞ squares

To complete the quilt you will need:

Backing Fabric:

  • 36″ x 54″

Wadding/Batting:

  • 36″x 54″

Use a ¼” seam allowance and press your seams open as you sew.

Start by joining 1 white 4⅞ squares to 1 pink (pattern 1) 4⅞ square. Then cut on the diagonal to create 4 squares of one white and one yellow triangle.

Then do the same with 2 white 4⅞ squares and 2 pink (pattern 2) 4⅞ squares. There are many sites with detailed Instructions on how to do this.  Here’s one of them.

The blocks are constructed by piecing 3 rows of 3 squares.  Piece each row then stitch the rows together in the following pattern:

Piecing instructions Baby Bud Quilt

Piecing instructions Baby Bud Quilt

Once you have made 6 blocks, stitch one 12″ white strip to each side of 3 blocks and one 12″ strip to only the right hand side of 3 blocks.

Now stitch the rows together in 3 groups of 2 blocks by adding one 36″ white strip to the top and bottom of one group of 2 blocks and then add blocks and strips, working your way down the piece until you have 3 groups of 2 blocks enclosed in white strips.

Place the backing fabric right side down on a large table, top this with the wadding then lay the pieced baby buds right side up on top of the wadding.  Pin all 3 layers together with large safety pins or tack/baste starting at the middle and working out towards each side.

Quilt.

Fold binding strip in half and press so you have 4 long pieces each 1″ wide. Machine each piece to each side of your quilt with raw edges together.  There is a great tutorial on how to do this here. (You’ll find the whole binding process much simpler and easier if you use a walking foot on your sewing machine.)

Either embroider or use an indelible marker to add your name, the date and who the quilt is for to a scrap of fabric and sew it to the back of the quilt.

Baby Buds Quilt

Baby Buds Quilt

Knitting for Baby Beanies

A few months ago I was contacted by Michelle from Baby Beanies.  She asked if anyone in our Sew, Knit and Natter group would be interested in knitting hats for premature babies.  She didn’t need to ask twice.  Knitters all around our area have been busy knitting, even people I don’t know have been giving me hats to send on to Michelle.

Baby Beanies

Tiny hats for premature babies

So far we have sent off 2 huge parcels of hats and we are still knitting.  The patterns (see below) are very easy even for novice knitters like me.

If you would like to make some hats for Baby Beanies to send on to premature babies in hospitals around the UK, please contact Michelle at Baby Beanies.  She will be delighted to hear from you.

Baby Beanies Newsletter

Babybeanies Roll Brim Beanie

Babybeanies Ribbed Brim Beanie

Pimped Bodysuit

That lovely little nappy cover that I made last week needed a top so I pimped a plain bodysuit. I added a piece of matching lace around the neck and an appliquéd heart from the same fabric as the pants.

Continue reading

Baby Swaddle Wraps

Quote

I made these 2 swaddle wraps last Saturday afternoon.  They were very quick and easy.

 

Bear Pattern Baby Swaddle Wrap

 

Continue reading