A Couple of Baby Quilts

Quote

I’ve just completed another couple of Baby Quilts.  One for a boy and one for a girl:

These were very simple and quick to piece and a good way use up scraps.

Baby Buds Quilt

Baby Buds Quilt

Sail Boats Quilt

Sail Boats Quilt

 

 

 

 

 

 

Both quilts are made up of 6 x 12″ squares (blocks). Here are the instructions for the Sailboat Quilt.

Sailboat Quilt

For each 12″ block you will need:

White Fabric:

  • 4 x 3½” squares
  • 3 x 3⅞ squares

Yellow Fabric:

  • 2 x 3⅞ squares
  • 2″ x 156″ (approx) for binding

Orange Fabric:

  • 2 x 3½” squares
  • 1 x 3⅞ square

Turquoise Fabric:

  • 4 x 3½” squares

To complete the quilt you will need:

Navy Fabric:

  • 9 strips 3½” x 12″
  • 4 strips 3½” x 33″

Backing Fabric:

  • 36″ x 48″

Wadding/Batting:

  • 36″x 48″

Use a ¼” seam allowance and press your seams open as you sew.

Start by joining 2 white 3⅞ squares to 2 yellow 3⅞ squares. Then cut on the diagonal to create 4 squares of one white and one yellow triangle.

Then do the same with one orange and one white 3⅞ square. There are many sites with detailed Instructions on how to do this.  Here’s one of them.

The blocks are constructed by piecing 4 rows of 4 squares then stitching the rows together in the following pattern:

Piecing instructions for Sailboat Quilt

Piecing instructions for Sailboat Quilt

Once you have made 6 blocks, stitch one 12″ navy strip to each side of 3 blocks and one 12″ strip to only the right hand side of 3 blocks.

Now stitch the rows together in 3 groups of 2 blocks by adding one 33″ navy strip to the top and bottom of one group of 2 blocks and then add blocks and strips, working your way down the piece until you have 3 groups of 2 blocks enclosed in navy strips.

Place the backing fabric right side down on a large table, top this with the wadding then lay the pieced sailboats right side up on top of the wadding.  Pin all 3 layers together with large safety pins or tack/baste starting at the middle and working out towards each side.

3 layers

3 layers

Quilt  with wavy lines to represent the sea.

Fold binding strip in half and press so you have 4 long pieces each 1″ wide. Machine each piece to each side of your quilt with raw edges together.  There is a great tutorial on how to do this here. (You’ll find the whole binding process much simpler and easier if you use a walking foot on your sewing machine.)

Either embroider or use an indelible marker to add your name, the date and who the quilt is for to a scrap of fabric and sew it to the back of the quilt.

Now you are ready to give a truly unique and personal gift.

Baby Buds Quilt

For each 12″ block you will need:

White Fabric:

  • 1 x 4½” squares
  • 3 x 4⅞ squares
  • 4 strips 4½” x 36″
  • 9 strips 4½” x 12″

Centre Square Fabric:

  • 1 x 4½ square
  • 2″ x 156″ (approx) for binding

Pink Pattern 1 Fabric:

  • 1 x 4½” squares
  • 2 x 4⅞ square

Pink Pattern 2 Fabric:

  • 1 x 4⅞ squares

To complete the quilt you will need:

Backing Fabric:

  • 36″ x 54″

Wadding/Batting:

  • 36″x 54″

Use a ¼” seam allowance and press your seams open as you sew.

Start by joining 1 white 4⅞ squares to 1 pink (pattern 1) 4⅞ square. Then cut on the diagonal to create 4 squares of one white and one yellow triangle.

Then do the same with 2 white 4⅞ squares and 2 pink (pattern 2) 4⅞ squares. There are many sites with detailed Instructions on how to do this.  Here’s one of them.

The blocks are constructed by piecing 3 rows of 3 squares.  Piece each row then stitch the rows together in the following pattern:

Piecing instructions Baby Bud Quilt

Piecing instructions Baby Bud Quilt

Once you have made 6 blocks, stitch one 12″ white strip to each side of 3 blocks and one 12″ strip to only the right hand side of 3 blocks.

Now stitch the rows together in 3 groups of 2 blocks by adding one 36″ white strip to the top and bottom of one group of 2 blocks and then add blocks and strips, working your way down the piece until you have 3 groups of 2 blocks enclosed in white strips.

Place the backing fabric right side down on a large table, top this with the wadding then lay the pieced baby buds right side up on top of the wadding.  Pin all 3 layers together with large safety pins or tack/baste starting at the middle and working out towards each side.

Quilt.

Fold binding strip in half and press so you have 4 long pieces each 1″ wide. Machine each piece to each side of your quilt with raw edges together.  There is a great tutorial on how to do this here. (You’ll find the whole binding process much simpler and easier if you use a walking foot on your sewing machine.)

Either embroider or use an indelible marker to add your name, the date and who the quilt is for to a scrap of fabric and sew it to the back of the quilt.

Baby Buds Quilt

Baby Buds Quilt